+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6210/C3: ⌀50 × ⌀90 × 20 mm6210/C3
Fig. 1: 6210/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6210/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6210/C3

€9.92per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 73 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
C3
C
37.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
23.2 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.45 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 50 × 90 × 20 from other brands

77 products
Photo: 6210/C3
You are viewingSKF 6210/C3
€9.92baseline for the price comparison

Everything the number specifies matches: series 62, 50 × 90 × 20 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€9.92).
02

Details

what this bearing is, questions

About the bearing

D 90d 50B 20
d×D×Bsize 50 × 90 × 20mm
Cdynamic 37.1kN
C0static 23.2kN
mweight 0.45kg

Deep groove ball bearing 6210 C3.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet