+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2313: ⌀65 × ⌀140 × 48 mm⌀140⌀65482313
Fig. 1: 2313, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2313

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing NSK 2313

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 4 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
48 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 65 × 140 × 48 from other brands

8 products
Series illustration (not a photo of this item): 2313
You are viewingNSK 2313

Everything the number specifies matches: series 23, 65 × 140 × 48 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NSK catalogue.

  • Series illustration (not a photo of this item): 23132313This bearingNSK65 × 140 × 48available to orderon requestyou are here
  • Photo: 23132313GPZ65 × 140 × 48available to order€52.65Request a quote
  • Series illustration (not a photo of this item): 23132313SKF65 × 140 × 48available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23132313ZVL65 × 140 × 48available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 48mm

Self-aligning ball bearing 2313. Under GOST the same bearing is designated 1613.

Frequently asked questions

What is 1613?

It is the same bearing under GOST 3189-89: 1613 corresponds to the ISO base 2313. Size 65 × 140 × 48 mm, a full equivalent of 2313.

Will 2313 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet