+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of 2313: ⌀65 × ⌀140 × 48 mm⌀140⌀65482313
Fig. 1: 2313, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2313

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing GPZ 2313

€52.65per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 4 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
48 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
3.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 65 × 140 × 48 from other brands

8 products
Photo: 2313
You are viewingGPZ 2313
€52.65baseline for the price comparison

Everything the number specifies matches: series 23, 65 × 140 × 48 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

  • Photo: 23132313This bearingGPZ65 × 140 × 48available to order€52.65you are here
  • Series illustration (not a photo of this item): 23132313NSK65 × 140 × 48available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23132313SKF65 × 140 × 48available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23132313ZVL65 × 140 × 48available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€52.65).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 48mm
mweight 3.25kg

Self-aligning ball bearing 2313. Under GOST the same bearing is designated 1613.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1613?

It is the same bearing under GOST 3189-89: 1613 corresponds to the ISO base 2313. Size 65 × 140 × 48 mm, a full equivalent of 2313.

Will 2313 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet