+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6003-2NSE9: ⌀17 × ⌀35 × 10 mm⌀35⌀17106003-2NSE92NSE
Fig. 1: 6003-2NSE9, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6003-2NSE9

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NACHI 6003-2NSE9

€1.97per piece
In stock: 130 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 31 approximate
d
17 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
10 mm
Width BRing width. Source: two supplier sources
Seal
2NSEcontact seals on both sides
C
6 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 17 × 35 × 10 from other brands

50 products
Cross-section drawing to size: Deep groove ball, 17 × 35 × 10 mm
You are viewingNACHI 6003-2NSE9
€1.97baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€1.97).
02

Details

what this bearing is, questions

About the bearing

D 35d 17B 10
d×D×Bsize 17 × 35 × 10mm
Cdynamic 6kN

Deep groove ball bearing 6003-2NSE9, design 2NSE: contact seals on both sides.

C: NACHI data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet