+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 5207 2RS: ⌀35 × ⌀72 × 27 mm⌀72⌀35275207 2RS2RS
Fig. 1: 5207 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 5207 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing Koyo 5207 2RS

€24.93per piece
In stock: 30 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 25 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
27 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
normal clearance
01

Equivalents

the same size 35 × 72 × 27 from other brands

30 products
Cross-section drawing to size: Deep groove ball, 35 × 72 × 27 mm
You are viewingKoyo 5207 2RS
€24.93baseline for the price comparison

Everything the number specifies matches: series 52, 35 × 72 × 27 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the Koyo catalogue.

  • Cross-section drawing to size: Deep groove ball, 35 × 72 × 27 mm5207 2RSThis bearingKoyo35 × 72 × 2730 pcs€24.93you are here
  • Cross-section drawing to size: Deep groove ball, 35 × 72 × 27 mm5207 2RSNTE35 × 72 × 278 pcs€5−€19.93Request a quote
  • Cross-section drawing to size: Deep groove ball, 35 × 72 × 27 mm5207 2RSCT35 × 72 × 27available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€24.93).
02

Details

what this bearing is, questions

About the bearing

D 72d 35B 27
d×D×Bsize 35 × 72 × 27mm

Deep groove ball bearing 5207-2RS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet