+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 5207 2RS: ⌀35 × ⌀72 × 27 mm⌀72⌀35275207 2RS2RS
Fig. 1: 5207 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 5207 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 5207 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 25 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
27 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
normal clearance
C
40 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
28 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.44 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 35 × 72 × 27 from other brands

30 products
Cross-section drawing to size: Deep groove ball, 35 × 72 × 27 mm
You are viewingCT 5207 2RS

Everything the number specifies matches: series 52, 35 × 72 × 27 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Deep groove ball, 35 × 72 × 27 mm5207 2RSThis bearingCT35 × 72 × 27available to orderon requestyou are here
  • Cross-section drawing to size: Deep groove ball, 35 × 72 × 27 mm5207 2RSNTE35 × 72 × 278 pcs€5Request a quote
  • Cross-section drawing to size: Deep groove ball, 35 × 72 × 27 mm5207 2RSKoyo35 × 72 × 2730 pcs€24.93Request a quote
02

Details

what this bearing is, questions

About the bearing

D 72d 35B 27
d×D×Bsize 35 × 72 × 27mm
Cdynamic 40kN
C0static 28kN
mweight 0.44kg

Deep groove ball bearing 5207-2RS, design 2RS: contact seals on both sides.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet