+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of NU 218: ⌀90 × ⌀160 × 30 mm⌀160⌀9030NU 218
Fig. 1: NU 218, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 218

Load: radial high; no axial loadCylindrical roller NU

Bearing KG NU 218

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
5 exact, 12 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
30 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 90 × 160 × 30 from other brands

17 products
Cross-section drawing to size: Cylindrical roller NU, 90 × 160 × 30 mm
You are viewingKG NU 218

Size and design match across the brand catalogues. The codes in the number are read against the KG catalogue.

  • Cross-section drawing to size: Cylindrical roller NU, 90 × 160 × 30 mmNU 218This bearingKG90 × 160 × 30available to orderon requestyou are here
  • Series illustration (not a photo of this item): NU 218 E TVP2NU 218 E TVP2FAG90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU218ENU218ENTE90 × 160 × 30available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 90 × 160 × 30 mmNU 218 ECMSKF90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 218 ECPNU 218 ECPSKF90 × 160 × 30available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 160 × 30mm

Cylindrical roller NU bearing NU 218.

Frequently asked questions

Will 218 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet