+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of NJ 211: ⌀55 × ⌀100 × 21 mm⌀100⌀5521NJ 211
Fig. 1: NJ 211, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 211

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing KG NJ 211

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
8 exact, 22 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
21 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 55 × 100 × 21 from other brands

34 products
Cross-section drawing to size: Cylindrical roller NJ, 55 × 100 × 21 mm
You are viewingKG NJ 211

Size and design match across the brand catalogues. The codes in the number are read against the KG catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 55 × 100 × 21 mmNJ 211This bearingKG55 × 100 × 21available to orderon requestyou are here
  • Cross-section drawing to size: Cylindrical roller NJ, 55 × 100 × 21 mmNJ 211CT55 × 100 × 21196 pcs€4.75Request a quote
  • Photo: NJ 211 EMNJ 211 EMZ&S55 × 100 × 21available to order€15.21Request a quote
  • Photo: NJ 211 ENNJ 211 ENZ&S55 × 100 × 21available to order€17.75Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 55 × 100 × 21 mmNJ211ET *5NSK55 × 100 × 21available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 211 ENJ 211 ENTE55 × 100 × 21available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 55 × 100 × 21 mmNJ 211 ECJSKF55 × 100 × 21available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 211 ECPNJ 211 ECPSKF55 × 100 × 21available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 100 × 21mm

Cylindrical roller NJ bearing NJ 211.

Frequently asked questions

Will 211 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet