+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 211 EN: ⌀55 × ⌀100 × 21 mm⌀100⌀5521NJ 211 EN
Fig. 1: NJ 211 EN, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
Bearing Z&S NJ 211 EN — photo 1
Bearing Z&S NJ 211 EN — photo 2
Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing Z&S NJ 211 EN

€17.75per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
OEM number
55 RJ 02
Equivalents
2 exact, 28 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
21 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.67 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 55 × 100 × 21 from other brands

34 products
Photo: NJ 211 EN
You are viewingZ&S NJ 211 EN
€17.75baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the Z&S catalogue.

  • Photo: NJ 211 ENNJ 211 ENThis bearingZ&S55 × 100 × 21available to order€17.75you are here
  • Series illustration (not a photo of this item): NJ 211 ENJ 211 ENTE55 × 100 × 21available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€17.75).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 100 × 21mm
mweight 0.67kg

Cylindrical roller NJ bearing NJ 211 EN.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 211 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet