+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6214 Z: ⌀70 × ⌀125 × 24 mm⌀125⌀70246214 ZZ
Fig. 1: 6214 Z, simplified drawing per ISO 8826-1. Dimensions in mm
Bearing GPZ 6214 Z — photo 1
Load: radial medium; axial low, on both sidesDeep groove ball

Bearing GPZ 6214 Z

€14.36per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 27 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
125 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
24 mm
Width BRing width. Source: two supplier sources
Seal
Zshield, one side
Clearance
normal clearance
m
1.05 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 70 × 125 × 24 from other brands

28 products
Photo: 6214 Z
You are viewingGPZ 6214 Z
€14.36baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€14.36).
02

Details

what this bearing is, questions

About the bearing

D 125d 70B 24
d×D×Bsize 70 × 125 × 24mm
mweight 1.05kg

Deep groove ball bearing 6214-Z, design Z: shield on one side. Under GOST the same bearing is designated 60214.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 60214?

It is the same bearing under GOST 3189-89: 6 — shield on one side, 0214 corresponds to the ISO base 6214. Size 70 × 125 × 24 mm, a full equivalent of 6214-Z.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet