+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NUP 2310: ⌀50 × ⌀110 × 40 mm⌀110⌀5040NUP 2310
Fig. 1: NUP 2310, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 2310

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing FAG NUP 2310

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 6 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
40 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.82 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 110 × 40 from other brands

8 products
Cross-section drawing to size: Cylindrical roller NUP, 50 × 110 × 40 mm
You are viewingFAG NUP 2310

Size and design match across the brand catalogues. The codes in the number are read against the FAG catalogue.

  • Cross-section drawing to size: Cylindrical roller NUP, 50 × 110 × 40 mmNUP 2310This bearingFAG50 × 110 × 40out of stockon requestyou are here
  • Photo: NUP 2310 ENUP 2310 EZ&S50 × 110 × 40available to order€21.04Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 110 × 40mm
mweight 1.82kg

Cylindrical roller NUP bearing NUP 2310.

M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2310 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet