+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NUP 2310 E: ⌀50 × ⌀110 × 40 mm⌀110⌀5040NUP 2310 E
Fig. 1: NUP 2310 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 2310 E

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing Z&S NUP 2310 E

€21.04per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 6 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
40 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.76 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 110 × 40 from other brands

8 products
Photo: NUP 2310 E
You are viewingZ&S NUP 2310 E
€21.04baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NJ, 50 × 110 × 40 mmNJ 2310different designCT50 × 110 × 4010 pcs€7.91−€13.13Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 40 mmNU2310-E-M1-C3clearance C3, E, M1FAG50 × 110 × 40available to orderon requestRequest a quote
  • Photo: NJ 2310 E1MNJ 2310 E1ME1, MNEU50 × 110 × 40out of stockon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 50 × 110 × 40 mmNJ 2310 ECPreinforced design EC, PSKF50 × 110 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 40 mmNU 2310 ECPreinforced design EC, PSKF50 × 110 × 40available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNJ 2310 EG1C3clearance C3, G1: not decodedNTN50 × 110 × ?available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€21.04).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 110 × 40mm
mweight 1.76kg

Cylindrical roller NUP bearing NUP 2310 E.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2310 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet