+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6024-ZZNR: ⌀120 × ⌀180 × 28 mm⌀180⌀120286024-ZZNRZZ
Fig. 1: 6024-ZZNR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6024-ZZNR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG 6024-ZZNR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 12 approximate
d
120 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
28 mm
Width BRing width. Source: supplier data
Seal
ZZshields, both sides
Clearance
normal clearance
01

Equivalents

the same size 120 × 180 × 28 from other brands

13 products
Cross-section drawing to size: Deep groove ball, 120 × 180 × 28 mm
You are viewingFAG 6024-ZZNR

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 60246024open, no protection, standard designCT120 × 180 × 2851 pcs€9.76Request a quote
  • Series illustration (not a photo of this item): 60246024open, no protection, standard designNTE120 × 180 × 283 pcs€16.42Request a quote
  • Series illustration (not a photo of this item): 60246024open, no protection, standard designDYZV120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60246024open, no protection, standard designKG120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60246024open, no protection, standard designSKF120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6024/C36024/C3open, no protection, clearance C3, standard designSKF120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6024 ZZ6024 ZZstandard designno brand120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6024 ZZ6024 ZZstandard designIBB120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6024 ZZ6024 ZZstandard designKG120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6024 ZZ6024 ZZstandard designNTE120 × 180 × 28available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 180d 120B 28
d×D×Bsize 120 × 180 × 28mm

Deep groove ball bearing 6024-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80124.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80124?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0124 corresponds to the ISO base 6024. Size 120 × 180 × 28 mm, a full equivalent of 6024-ZZ.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet