+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6024 ZZ: ⌀120 × ⌀180 × 28 mm6024 ZZZZ
Fig. 1: 6024 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6024 ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 6024 ZZ

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
4 exact, 9 approximate
d
120 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
28 mm
Width BRing width. Source: supplier data
Seal
ZZshields, both sides
Clearance
normal clearance
C
88.4 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
80 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
2.05 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 120 × 180 × 28 from other brands

13 products
Series illustration (not a photo of this item): 6024 ZZ
You are viewingNTE 6024 ZZ

Everything the number specifies matches: series 60, 120 × 180 × 28 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

  • Series illustration (not a photo of this item): 6024 ZZ6024 ZZThis bearingNTE120 × 180 × 28available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6024 ZZ6024 ZZno brand120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6024 ZZ6024 ZZIBB120 × 180 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6024 ZZ6024 ZZKG120 × 180 × 28available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 180d 120B 28
d×D×Bsize 120 × 180 × 28mm
Cdynamic 88.4kN
C0static 80kN
mweight 2.05kg

Deep groove ball bearing 6024-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80124.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80124?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0124 corresponds to the ISO base 6024. Size 120 × 180 × 28 mm, a full equivalent of 6024-ZZ.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet