+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2204 TV: ⌀20 × ⌀47 × 18 mm⌀47⌀20182204 TV
Fig. 1: 2204 TV, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2204-TV

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing FAG 2204-TV

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 13 approximate
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
18 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.134 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 20 × 47 × 18 from other brands

15 products
Series illustration (not a photo of this item): 2204 TV
You are viewingFAG 2204-TV

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 2204 2RS2204 2RScontact seals on both sides, standard designCT20 × 47 × 18584 pcs€1.38Request a quote
  • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RScontact seals on both sides, stainless steelCT20 × 47 × 1811 pcs€5.21Request a quote
  • Photo: 2204 2RS2204 2RScontact seals on both sides, standard designZ&S20 × 47 × 18available to order€4.05Request a quote
  • Photo: 2204 E-2RS1TN92204 E-2RS1TN9contact seals on both sides, different cage, ESKF20 × 47 × 18available to order€20.65Request a quote
  • Series illustration (not a photo of this item): 2204 2RS2204 2RScontact seals on both sides, standard designno brand20 × 47 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RS TNcontact seals on both sides, TN, stainless steelIBB20 × 47 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mm2204-2RSTNG N YRLN5contact seals on both sides, 5, TNG, Y, groove for a snap ring, RL: not decodedNSK20 × 47 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RScontact seals on both sides, stainless steelno brand20 × 47 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmS 2204 2RScontact seals on both sides, S: not decodedTECHNOX20 × 47 × 18available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22042204standard designM.G.M.20 × 47 × 18out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 20 × 47 × 18mm
mweight 0.134kg

Self-aligning ball bearing 2204. Under GOST the same bearing is designated 1504.

M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1504?

It is the same bearing under GOST 3189-89: 1504 corresponds to the ISO base 2204. Size 20 × 47 × 18 mm, a full equivalent of 2204.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet