+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
IBB
Drawing of SS 2204 2RS TN: ⌀20 × ⌀47 × 18 mm⌀47⌀2018SS 2204 2RS TN2RS
Fig. 1: SS 2204 2RS TN, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of SS 2204 2RS TN

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing IBB SS 2204 2RS TN

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 11 approximate
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
18 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
normal clearance
01

Equivalents

the same size 20 × 47 × 18 from other brands

15 products
Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mm
You are viewingIBB SS 2204 2RS TN

Everything the number specifies matches: series 22, 20 × 47 × 18 mm, contact seals on both sides, normal clearance, special design. The codes in the number are read against the IBB catalogue.

  • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RS TNThis bearingIBB20 × 47 × 18available to orderon requestyou are here
  • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RSCT20 × 47 × 1811 pcs€5.21Request a quote
  • Cross-section drawing to size: Self-aligning ball, 20 × 47 × 18 mmSS 2204 2RSno brand20 × 47 × 18available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 20 × 47 × 18mm

Self-aligning ball bearing 2204-2RS SS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet