+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 20208-TVP: ⌀40 × ⌀80 × 18 mm⌀80⌀401820208-TVP
Fig. 1: 20208-TVP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 20208-TVP

Load: radial high; axial medium, on both sidesSpherical roller

Bearing FAG 20208-TVP

€115.23per piece
In stock: 10 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
0 exact, 24 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
18 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
49.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
53 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.371 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 40 × 80 × 18 from other brands

27 products
Photo: 20208-TVP
You are viewingFAG 20208-TVP
€115.23baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€115.23).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 80 × 18mm
Cdynamic 49.5kN
C0static 53kN
mweight 0.371kg

Spherical roller bearing 20208.

C, C₀, m: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 20208 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet