+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22208 E: ⌀40 × ⌀80 × 23 mm⌀80⌀402322208 E
Fig. 1: 22208 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22208 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22208 E

€37.67per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 21 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
96.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
90 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 40 × 80 × 23 from other brands

22 products
Photo: 22208 E
You are viewingSKF 22208 E
€37.67baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 40 × 80 × 23 mm22208 KCW33C, lubrication groove and holes, 1:12 tapered boreCT40 × 80 × 23350 pcs€3.14−€34.53Request a quote
  • Series illustration (not a photo of this item): 22208 C/W3322208 C/W33C, lubrication groove and holesCT40 × 80 × 23721 pcs€4.02−€33.65Request a quote
  • Cross-section drawing to size: Spherical roller, 40 × 80 × 23 mm22208 CA/W33CA, lubrication groove and holesCT40 × 80 × 23168 pcs€5.57−€32.10Request a quote
  • Series illustration (not a photo of this item): 22208 CW3322208 CW33CW33NTE40 × 80 × 2314 pcs€6.77−€30.90Request a quote
  • Cross-section drawing to size: Spherical roller, 40 × 80 × 23 mm22208 CAW33CA, lubrication groove and holesNTE40 × 80 × 2310 pcs€7.39−€30.28Request a quote
  • Photo: 22208 EJW3322208 EJW33E, lubrication groove and holes, J: not decodedTIMKEN40 × 80 × 238 pcs€28.97−€8.70Request a quote
  • Cross-section drawing to size: Spherical roller, 40 × 80 × 23 mm22208 CCW33CC, lubrication groove and holesNTE40 × 80 × 23available to order€7.59−€30.08Request a quote
  • Photo: 22208 CC W3322208 CC W33C, lubrication groove and holesZ&S40 × 80 × 23available to order€9.83−€27.84Request a quote
  • Cross-section drawing to size: Spherical roller, 40 × 80 × 23 mm22208 KCW33C, lubrication groove and holes, 1:12 tapered boreno brand40 × 80 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22208 CW3322208 CW33CW33AKE40 × 80 × 23available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€37.67).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 80 × 23mm
Cdynamic 96.5kN
C0static 90kN

Spherical roller bearing 22208. Under GOST the same bearing is designated 3508.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3508?

It is the same bearing under GOST 3189-89: 3508 corresponds to the ISO base 22208. Size 40 × 80 × 23 mm, a full equivalent of 22208.

Will 22208 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet