+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NU 2312 E: ⌀60 × ⌀130 × 46 mm⌀130⌀6046NU 2312 E
Fig. 1: NU 2312 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 2312 E

Load: radial high; no axial loadCylindrical roller NU

Bearing CT NU 2312 E

€11.58per piece
In stock: 19 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 17 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
46 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
260 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 60 × 130 × 46 from other brands

18 products
Cross-section drawing to size: Cylindrical roller NU, 60 × 130 × 46 mm
You are viewingCT NU 2312 E
€11.58baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller N, 60 × 130 × 46 mmN 2312different designCT60 × 130 × 4639 pcs€13.52+€1.94Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 46 mmNJ 2312different designCT60 × 130 × 46110 pcs€13.55+€1.97Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 46 mmNJ2312J PQJ, PQ: not decodedNTE60 × 130 × 466 pcs€23.92+€12.34Request a quote
  • Photo: NUP 2312 ENUP 2312 Edifferent designZ&S60 × 130 × 46available to order€31.14+€19.56Request a quote
  • Photo: NJ 2312 ENJ 2312 Edifferent designZ&S60 × 130 × 46available to order€43.96+€32.38Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 46 mmNJ2312+HJ2312HJ2312: not decodedCT60 × 130 × 46available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNJ2312-E-XL-M1A-QP51-C4clearance C4, E, M1A, XL, QP51: not decodedFAG60 × 130 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 60 × 130 × 46 mmNU2312-E-XL-M1E, M1, XLFAG60 × 130 × 46available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 60 × 130 × 46 mmN 2312different designKG60 × 130 × 46available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 60 × 130 × 46 mmNU 2312 WWNSK60 × 130 × 46available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€11.58).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 130 × 46mm
Cdynamic 260kN

Cylindrical roller NU bearing NU 2312 E.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2312 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet