+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 2312: ⌀60 × ⌀130 × 46 mm⌀130⌀6046NJ 2312
Fig. 1: NJ 2312, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 2312

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing CT NJ 2312

€13.55per piece
In stock: 110 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
4 exact, 12 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
46 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
260 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
265 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
2.8 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 130 × 46 from other brands

18 products
Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 46 mm
You are viewingCT NJ 2312
€13.55baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 46 mmNJ 2312This bearingCT60 × 130 × 46110 pcs€13.55you are here
  • Photo: NJ 2312 ENJ 2312 EZ&S60 × 130 × 46available to order€43.96+€30.41Request a quote
  • Series illustration (not a photo of this item): NJ 2312 ENJ 2312 ENTE60 × 130 × 46available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 46 mmNJ 2312 ECMLSKF60 × 130 × 46available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€13.55).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 130 × 46mm
Cdynamic 260kN
C0static 265kN
mweight 2.8kg

Cylindrical roller NJ bearing NJ 2312.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2312 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet