+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NU 205: ⌀25 × ⌀52 × 15 mm⌀52⌀2515NU 205
Fig. 1: NU 205, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 205

Load: radial high; no axial loadCylindrical roller NU

Bearing CT NU 205

€1.68per piece
In stock: 5 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
11 exact, 25 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
28.6 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
27 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.14 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 25 × 52 × 15 from other brands

37 products
Cross-section drawing to size: Cylindrical roller NU, 25 × 52 × 15 mm
You are viewingCT NU 205
€1.68baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NU, 25 × 52 × 15 mmNU 205This bearingCT25 × 52 × 155 pcs€1.68you are here
  • Photo: NU 205 ENU 205 EZ&S25 × 52 × 15available to order€6.70+€5.02Request a quote
  • Photo: NU 205NU 205URB25 × 52 × 15available to order€9.86+€8.18Request a quote
  • Photo: NU 205 ECPNU 205 ECPSKF25 × 52 × 15available to order€18.98+€17.30Request a quote
  • Photo: NU 205NU 205FAG25 × 52 × 15available to order€31.45+€29.77Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 25 × 52 × 15 mmNU 205DKF25 × 52 × 15out of stockon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 25 × 52 × 15 mmNU 205FKL25 × 52 × 15out of stockon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 25 × 52 × 15 mmNU 205 ECJISB25 × 52 × 15available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 25 × 52 × 15 mmNU 205 EWNSK25 × 52 × 15available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 25 × 52 × 15 mmNU205ET *5NSK25 × 52 × 15available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€1.68).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 25 × 52 × 15mm
Cdynamic 28.6kN
C0static 27kN
mweight 0.14kg

Cylindrical roller NU bearing NU 205.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 205 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet