+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NU 205 ECP: ⌀25 × ⌀52 × 15 mm⌀52⌀2515NU 205 ECP
Fig. 1: NU 205 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 205 ECP

Load: radial high; no axial loadCylindrical roller NU

Bearing SKF NU 205 ECP

€18.98per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 31 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
27 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 25 × 52 × 15 from other brands

37 products
Photo: NU 205 ECP
You are viewingSKF NU 205 ECP
€18.98baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ 205different designCT25 × 52 × 1558 pcs€1.77−€17.21Request a quote
  • Cross-section drawing to size: Cylindrical roller NUP, 25 × 52 × 15 mmNUP 205different designCT25 × 52 × 154 pcs€1.86−€17.12Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ205J PQJ, PQ: not decodedNTE25 × 52 × 1548 pcs€3.44−€15.54Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 25 × 52 × 15 mmNU205J PQJ, PQ: not decodedNTE25 × 52 × 1526 pcs€3.44−€15.54Request a quote
  • Photo: NJ 205 ENJ 205 EEZ&S25 × 52 × 15available to order€6.21−€12.77Request a quote
  • Photo: NU 205 ENU 205 EEZ&S25 × 52 × 15available to order€6.70−€12.28Request a quote
  • Photo: NJ 205NJ 205different designFAG25 × 52 × 15available to order€22.90+€3.92Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ 205different designDKF25 × 52 × 15out of stockon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 25 × 52 × 15 mmN 205 EM1E, M1FAG25 × 52 × 15available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 25 × 52 × 15 mmNJ205-E-XL-M1E, M1, XLFAG25 × 52 × 15available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€18.98).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 25 × 52 × 15mm
C0static 27kN

Cylindrical roller NU bearing NU 205 ECP.

C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 205 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet