+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 27313: ⌀65 × ⌀140 mm⌀140⌀6527313
Fig. 1: 27313, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type; GOST number = ISO 31313, dimensions from the GOST↔ISO table CX p.771. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 27313

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing CT Malaysia 27313

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
4 exact, 8 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
01

Equivalents

the same size 65 × 140 from other brands

14 products
Type diagram, no dimensions: bearing
You are viewingCT 27313

Everything the number specifies matches: series 273, 65 × 140 mm, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Type diagram, no dimensions: bearing27313This bearingCT65 × 140 × ?available to orderon requestyou are here
  • Cross-section drawing to size: Tapered roller, 65 × 140 × T 36 mm31313no brand65 × 140 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Tapered roller, 65 × 140 × T 36 mm31313CT65 × 140 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Tapered roller, 65 × 140 × T 36 mm31313NTE65 × 140 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140mm

Tapered roller bearing 27313.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet