+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 31313: ⌀65 × ⌀140 × 36 mm⌀140⌀65T 36α31313
Fig. 1: 31313, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 31313

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing 31313

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 8 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
T
36 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
01

Equivalents

the same size 65 × 140 × 36 from other brands

14 products
Cross-section drawing to size: Tapered roller, 65 × 140 × T 36 mm
You are viewing31313

Everything the number specifies matches: series 313, 65 × 140 mm, ordinary steel, design without special letters.

  • Cross-section drawing to size: Tapered roller, 65 × 140 × T 36 mm31313This bearingno brand65 × 140 × ?available to orderon requestyou are here
  • Cross-section drawing to size: Tapered roller, 65 × 140 × T 36 mm31313CT65 × 140 × ?available to orderon requestRequest a quote
  • Type diagram, no dimensions: bearing27313CT65 × 140 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Tapered roller, 65 × 140 × T 36 mm31313NTE65 × 140 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 65 × 140 × 36mm

Tapered roller bearing 31313. Under GOST the same bearing is designated 27313.

Frequently asked questions

What is 27313?

It is the same bearing under GOST 3189-89: 27313 corresponds to the ISO base 31313. Size 65 × 140 × 36 mm, a full equivalent of 31313.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet