+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 7202AC: ⌀15 × ⌀35 × 11 mm⌀35⌀15117202AC
Fig. 1: 7202AC, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7202AC

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing CT 7202AC

€0.81per piece
In stock: 14 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 8 approximate
d
15 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
11 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
C
8.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 15 × 35 × 11 from other brands

13 products
Cross-section drawing to size: Angular contact ball, 15 × 35 × 11 mm
You are viewingCT 7202AC
€0.81baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€0.81).
02

Details

what this bearing is, questions

About the bearing

D 35d 15B 11
d×D×Bsize 15 × 35 × 11mm
Cdynamic 8.1kN

Angular contact ball bearing 7202 AC.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet