+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 7202 BTNG: ⌀15 × ⌀35 × 11 mm⌀35⌀15117202 BTNG
Fig. 1: 7202 BTNG, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7202 BTNG

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing CT 7202 BTNG

€0.92per piece
In stock: 220 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 7 approximate
d
15 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
11 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
01

Equivalents

the same size 15 × 35 × 11 from other brands

13 products
Cross-section drawing to size: Angular contact ball, 15 × 35 × 11 mm
You are viewingCT 7202 BTNG
€0.92baseline for the price comparison

Everything the number specifies matches: series 72, 15 × 35 × 11 mm, open, no protection, B, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Angular contact ball, 15 × 35 × 11 mm7202 BTNGThis bearingCT15 × 35 × 11220 pcs€0.92you are here
  • Series illustration (not a photo of this item): 7202 B7202 BCT15 × 35 × 1191 pcs€0.81−€0.11Request a quote

Under the price: the difference from the price of this bearing (€0.92).
02

Details

what this bearing is, questions

About the bearing

D 35d 15B 11
d×D×Bsize 15 × 35 × 11mm

Angular contact ball bearing 7202 B. Under GOST the same bearing is designated 66202.

Frequently asked questions

What is 66202?

It is the same bearing under GOST 3189-89: 66202 corresponds to the ISO base 7202 B. Size 15 × 35 × 11 mm, a full equivalent of 7202 B.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet