+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6022 2RS: ⌀110 × ⌀170 × 28 mm6022 2RS2RS
Fig. 1: 6022 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6022 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6022 2RS

€9.66per piece
In stock: 55 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 9 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
28 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
C
85.2 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
73.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
1.95 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 110 × 170 × 28 from other brands

10 products
Series illustration (not a photo of this item): 6022 2RS
You are viewingCT 6022 2RS
€9.66baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€9.66).
02

Details

what this bearing is, questions

About the bearing

D 170d 110B 28
d×D×Bsize 110 × 170 × 28mm
Cdynamic 85.2kN
C0static 73.5kN
mweight 1.95kg

Deep groove ball bearing 6022-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180122.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180122?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0122 corresponds to the ISO base 6022. Size 110 × 170 × 28 mm, a full equivalent of 6022-2RS.

Will 6022 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet