+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6022-2ZR: ⌀110 × ⌀170 × 28 mm6022-2ZR2ZR
Fig. 1: 6022-2ZR, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6022-2ZR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing URB 6022-2ZR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
4 exact, 6 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
28 mm
Width BRing width. Source: supplier data
Seal
2ZRmetal shields on both sides
Clearance
normal clearance
01

Equivalents

the same size 110 × 170 × 28 from other brands

10 products
Series illustration (not a photo of this item): 6022-2ZR
You are viewingURB 6022-2ZR

Everything the number specifies matches: series 60, 110 × 170 × 28 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the URB catalogue.
02

Details

what this bearing is, questions

About the bearing

D 170d 110B 28
d×D×Bsize 110 × 170 × 28mm

Deep groove ball bearing 6022-ZZ, design 2ZR: metal shields on both sides. Under GOST the same bearing is designated 80122.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80122?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0122 corresponds to the ISO base 6022. Size 110 × 170 × 28 mm, a full equivalent of 6022-ZZ.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet