+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22334 CA/W33: ⌀170 × ⌀360 × 120 mm⌀360⌀17012022334 CA/W33
Fig. 1: 22334 CA/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22334 CA/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22334 CA/W33

€207.62per piece
In stock: 78 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 12 approximate
d
170 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
360 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
120 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
1,150 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 170 × 360 × 120 from other brands

13 products
Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm
You are viewingCT 22334 CA/W33
€207.62baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm22334 MBW33MB, lubrication groove and holesCT170 × 360 × 1206 pcs€188.19−€19.43Request a quote
  • Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm22334 KMW33M, lubrication groove and holes, 1:12 tapered boreCT170 × 360 × 12032 pcs€196.47−€11.15Request a quote
  • Type diagram, no dimensions: spherical22334 K MW33 AAAM, lubrication groove and holes, 1:12 tapered bore, AAA: not decodedno brand170 × 360 × ?10 pcs€307.64+€100.02Request a quote
  • Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm22334 MW33M, lubrication groove and holesno brand170 × 360 × 120available to order€250.65+€43.03Request a quote
  • Type diagram, no dimensions: spherical22334 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedCT170 × 360 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm22334 MW33M, lubrication groove and holesCT170 × 360 × 120available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm22334 MBW33MB, lubrication groove and holesKG170 × 360 × 120available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm22334 MBW33C3clearance C3, MB, lubrication groove and holesKG170 × 360 × 120available to orderon requestRequest a quote
  • Type diagram, no dimensions: spherical22334CAME4S11 LR *H* 55, CAM, H, S11, lubrication groove and holes, LR: not decodedNSK170 × 360 × ?available to orderon requestRequest a quote
  • Type diagram, no dimensions: spherical22334 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedNTE170 × 360 × ?available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€207.62).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 170 × 360 × 120mm
Cdynamic 1,150kN

Spherical roller bearing 22334. Under GOST the same bearing is designated 3634.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3634?

It is the same bearing under GOST 3189-89: 3634 corresponds to the ISO base 22334. Size 170 × 360 × 120 mm, a full equivalent of 22334.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet