+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22334 MW33: ⌀170 × ⌀360 × 120 mm⌀360⌀17012022334 MW33
Fig. 1: 22334 MW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22334 MW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT Malaysia 22334 MW33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 11 approximate
d
170 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
360 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
120 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 170 × 360 × 120 from other brands

13 products
Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm
You are viewingCT 22334 MW33

Everything the number specifies matches: series 223, 170 × 360 × 120 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm22334 MW33This bearingCT170 × 360 × 120available to orderon requestyou are here
  • Cross-section drawing to size: Spherical roller, 170 × 360 × 120 mm22334 MW33no brand170 × 360 × 120available to order€250.65Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 170 × 360 × 120mm

Spherical roller bearing 22334. Under GOST the same bearing is designated 3634.

Frequently asked questions

What is 3634?

It is the same bearing under GOST 3189-89: 3634 corresponds to the ISO base 22334. Size 170 × 360 × 120 mm, a full equivalent of 22334.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet