POWERCLASSIC
Exactsame number
SPC · 5100profile · Ld, mm
€12.27
150 pcsV-belt SPC 5100
3 offers · 3 brandsPrices in euros incl. VATPrices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Where there is no price, the page says “on request”: the manager names it after the call.
Section SPC to DIN 7753-1 / ISO 4184; the supplier has no photos of these items.
NumberNarrow V-belt, profile SPC · Drive and conveyor belts
SPC 5100
Narrow V-belt of profile SPC, pitch length 5100 mm. The number is not tied to a brand: SPC 5100 is made by 3 manufacturers from our catalogue, and the size is the same for all of them. Below are all offers for this number.
- LdPitch length Ld Length along the neutral line of the belt, this is the number in the part number. DIN catalogues call it Lw; the value is the same.
- 5100 mm
- LaOutside length La Length along the back of the belt, the one a tape measure gives. For profile SPC it is 30 mm longer than the pitch length.
- 5130 mm
- wdPitch width wd Belt width at the neutral line. It equals the pitch width of the SPC pulley groove: the belt and the pulley fit each other by it.
- 19 mm
- bTop width b Width of the belt back. Use it to check the profile of an old belt with calipers.
- 22 mm
- hHeight h Height of the section from the back to the bottom face of the wedge.
- 18 mm
3offersoffers
3brands
1with a price
1in stock
Other spellings of this number
SPC5100in the catalogue
No filters: all offers for the number are shown
Same number SPC 5100: profile SPC, pitch length 5100 mm.1 of 3 in stock
Match is judged by profile, length and design from the number; a number with an undecoded suffix goes to “Check”.
SPC5100Narrow V-belt
Mitsuboshi
Exactsame number
SPC · 5100profile · Ld, mm
on request
available to orderSPC 5100Narrow V-belt
SWR
Exactsame number
SPC · 5100profile · Ld, mm
on request
available to orderMatch is judged by profile, length and design from the number; a number with an undecoded suffix goes to “Check”.