CT belt
Exactsame number
SPB · 887profile · Ld, mm
on request
available to orderV-belt SPB 887
2 offers · 2 brandsPrices in euros incl. VATPrices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Where there is no price, the page says “on request”: the manager names it after the call.
Section SPB to DIN 7753-1 / ISO 4184; the supplier has no photos of these items.
NumberNarrow V-belt, profile SPB · Drive and conveyor belts
SPB 887
Narrow V-belt of profile SPB, pitch length 887 mm. The number is not tied to a brand: SPB 887 is made by 2 manufacturers from our catalogue, and the size is the same for all of them. Below are all offers for this number.
- LdPitch length Ld Length along the neutral line of the belt, this is the number in the part number. DIN catalogues call it Lw; the value is the same.
- 887 mm
- LaOutside length La Length along the back of the belt, the one a tape measure gives. For profile SPB it is 22 mm longer than the pitch length.
- 909 mm
- wdPitch width wd Belt width at the neutral line. It equals the pitch width of the SPB pulley groove: the belt and the pulley fit each other by it.
- 14 mm
- bTop width b Width of the belt back. Use it to check the profile of an old belt with calipers.
- 16.3 mm
- hHeight h Height of the section from the back to the bottom face of the wedge.
- 13 mm
2offersoffers
2brands
0with a price
0in stock
No filters: all offers for the number are shown
Same number SPB 887: profile SPB, pitch length 887 mm.0 of 2 in stock
Match is judged by profile, length and design from the number; a number with an undecoded suffix goes to “Check”.
SPB 887Narrow V-belt
DELUX
Exactsame number
SPB · 887profile · Ld, mm
on request
available to orderMatch is judged by profile, length and design from the number; a number with an undecoded suffix goes to “Check”.