+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6238 · 190 × 340 × 55

Deep groove ball · 6238

radial — mediumaxial — low, on both sides
    Drawing of 6238: ⌀190 × ⌀340 × 55 mm6238
    Fig. 1: 6238, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6238

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing ZVL 6238

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    2 exact, 1 approximate
    d
    190 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    340 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    55 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 190 × 340 × 55 from other brands

    4 products
    Series illustration (not a photo of this item): 6238
    You are viewingZVL 6238

    Everything the number specifies matches: series 62, 190 × 340 × 55 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZVL catalogue.

    • Series illustration (not a photo of this item): 62386238This bearingZVL190 × 340 × 55available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62386238ZEN190 × 340 × 55available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 340d 190B 55
    d×D×Bsize 190 × 340 × 55mm

    Deep groove ball bearing 6238. Under GOST the same bearing is designated 238.

    Frequently asked questions

    What is 238?

    It is the same bearing under GOST 3189-89: 238 corresponds to the ISO base 6238. Size 190 × 340 × 55 mm, a full equivalent of 6238.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet