+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6038 · 190 × 290 × 46

Deep groove ball · 6038

radial — mediumaxial — low, on both sides
    Drawing of 6038: ⌀190 × ⌀290 × 46 mm6038
    Fig. 1: 6038, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6038

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing ZVL 6038

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    2 exact, 2 approximate
    d
    190 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    290 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    46 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 190 × 290 × 46 from other brands

    4 products
    Series illustration (not a photo of this item): 6038
    You are viewingZVL 6038

    Everything the number specifies matches: series 60, 190 × 290 × 46 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZVL catalogue.

    • Series illustration (not a photo of this item): 60386038This bearingZVL190 × 290 × 46available to orderon requestyou are here
    • Series illustration (not a photo of this item): 60386038CT190 × 290 × 46available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 290d 190B 46
    d×D×Bsize 190 × 290 × 46mm

    Deep groove ball bearing 6038. Under GOST the same bearing is designated 138.

    Frequently asked questions

    What is 138?

    It is the same bearing under GOST 3189-89: 138 corresponds to the ISO base 6038. Size 190 × 290 × 46 mm, a full equivalent of 6038.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet