+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €42.50 per piece.
2218 · 90 × 160 × 40

Self-aligning ball · 2218

radial — mediumaxial — low, on both sides
    Drawing of 2218: ⌀90 × ⌀160 × 40 mm⌀160⌀90402218
    Fig. 1: 2218, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing ZKL 2218 — photo 1
    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing ZKL 2218

    €51.43per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 4 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    40 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    3.18 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 90 × 160 × 40 from other brands

    6 products
    Photo: 2218
    You are viewingZKL 2218
    €51.43baseline for the price comparison

    Everything the number specifies matches: series 22, 90 × 160 × 40 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZKL catalogue.

    • Photo: 22182218This bearingZKL90 × 160 × 40available to order€51.43you are here
    • Photo: 22182218SKF90 × 160 × 40available to order€215.08+€163.65

    Under the price: the difference from the price of this bearing (€51.43).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 40mm
    mweight 3.18kg

    Self-aligning ball bearing 2218.

    M: ZKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet