+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2215 · 75 × 130 × 31

Self-aligning ball · 2215

radial — mediumaxial — low, on both sides
    Drawing of 2215: ⌀75 × ⌀130 × 31 mm⌀130⌀75312215
    Fig. 1: 2215, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2215

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing ZKL 2215

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 4 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    31 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.78 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 130 × 31 from other brands

    8 products
    Series illustration (not a photo of this item): 2215
    You are viewingZKL 2215

    Everything the number specifies matches: series 22, 75 × 130 × 31 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZKL catalogue.

    • Series illustration (not a photo of this item): 22152215This bearingZKL75 × 130 × 31out of stockon requestyou are here
    • Series illustration (not a photo of this item): 22152215KG75 × 130 × 3112 pcs€12.84
    • Photo: 22152215GPZ75 × 130 × 31available to order€28.21
    • Photo: 22152215M.G.M.75 × 130 × 31available to order€34.85
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 75 × 130 × 31mm
    mweight 0.78kg

    Self-aligning ball bearing 2215.

    M: ZKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet