+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
ZEN
SS 51101 · 12 × 26 × 9

Thrust ball · SS 51101

axial — medium, on one side
    Drawing of SS 51101: ⌀12 × ⌀26 × 9 mm⌀26⌀129SS 51101
    Fig. 1: SS 51101, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of SS 51101

    Load: no radial load; axial medium, on one sideThrust ball

    Bearing ZEN SS 51101

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 5 approximate
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    26 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    H
    9 mm
    Height HMounting height: the distance between the seating faces of the washers of an assembled thrust bearing (ISO 104). Source: supplier data
    01

    Equivalents

    the same size 12 × 26 × 9 from other brands

    9 products
    Series illustration (not a photo of this item): SS 51101
    You are viewingZEN SS 51101

    Everything the number specifies matches: series 511, 12 × 26 × 9 mm, stainless steel. The codes in the number are read against the ZEN catalogue.

    • Series illustration (not a photo of this item): SS 51101SS 51101This bearingZEN12 × 26 × 9available to orderon requestyou are here
    • Series illustration (not a photo of this item): SS 51101SS 51101GBM12 × 26 × 9available to orderon request
    • Series illustration (not a photo of this item): SS 51101SS 51101IBB12 × 26 × 9available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Hsize 12 × 26 × 9mm

    Thrust ball bearing 51101 SS.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet