+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
ZEN
2209 2RS · 45 × 85 × 23

Self-aligning ball · 2209 2RS

radial — mediumaxial — low, on both sides
    Drawing of 2209 2RS: ⌀45 × ⌀85 × 23 mm⌀85⌀45232209 2RS2RS
    Fig. 1: 2209 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2209 2RS

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing ZEN 2209 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 14 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    85 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    18.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    10.9 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    7,100 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.545 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 85 × 23 from other brands

    19 products
    Series illustration (not a photo of this item): 2209 2RS
    You are viewingZEN 2209 2RS

    Everything the number specifies matches: series 22, 45 × 85 × 23 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the ZEN catalogue.

    • Series illustration (not a photo of this item): 2209 2RS2209 2RSThis bearingZEN45 × 85 × 23available to orderon requestyou are here
    • Series illustration (not a photo of this item): 2209 2RS2209 2RSCT45 × 85 × 23126 pcs€3.62
    • Series illustration (not a photo of this item): 2209 2RS2209 2RSno brand45 × 85 × 23available to orderon request
    • Series illustration (not a photo of this item): 2209 2RS2209 2RSKG45 × 85 × 23available to orderon request
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø85, seal 45×85

    4 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø85CT SEG 85 W by 100Why it fits: DIN 472 snap ring for a 85 bore: holds the outer ring in the housing
      €22.57out of stock
    • Seal 45×85JULU 045-85-10 TCWhy it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.62690 pcs
    • Seal 45×85SOG Oil seal 45x85x10Why it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 45 × 85 × 23mm
    Cdynamic 18.4kN
    C0static 10.9kN
    mweight 0.545kg

    Self-aligning ball bearing 2209-2RS, design 2RS: contact seals on both sides.

    C, C₀, m and limiting speed 7,100 rpm: ZEN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet