+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.91 per piece.
Z9504 RST · 19.05 × 45.225 × 15.49

Deep groove ball · Z9504 RST · simplified: bore (cylindrical or K), not given in the designation

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of Z9504 RST: ⌀19.05 × ⌀45.225 × 15.49 mm⌀45.225⌀19.0515.49Z9504 RSTRS
    Fig. 1: Z9504 RST, simplified drawing per ISO 8826-1. Dimensions in mm
    Bearing Z&S Z9504 RST — photo 1
    Bearing Z&S Z9504 RST — photo 2
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S Z9504 RST

    €2.31per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    OEM number
    204KRNP2, SC0451IIC3, CASE C28971 +2
    d
    19.05 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    45.225 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    15.49 mm
    Width BRing width. Source: two supplier sources
    Seal
    RSrubber, one side
    C
    12.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    m
    0.2 kg
    MassWeight of the product. Source: supplier data
    01

    Details

    what this bearing is, questions

    About the bearing

    D 45.225d 19.05B 15.49
    d×D×Bsize 19.05 × 45.225 × 15.49mm
    Cdynamic 12.9kN
    mweight 0.2kg

    Deep groove ball bearing Z9504 RST, design RS: contact seal on one side.

    C, m: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    02

    Reviews

    No reviews yet