+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €15.05 per piece.
RMS 10 2RS · 31.75 × 79.375 × 22.225

Deep groove ball · RMS 10 2RS · simplified: bore (cylindrical or K), not given in the designation

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of RMS 10 2RS: ⌀31.75 × ⌀79.375 × 22.225 mm⌀79.375⌀31.7522.225RMS 10 2RS2RS
    Fig. 1: RMS 10 2RS, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of RMS 10 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S RMS 10 2RS

    €18.21per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    d
    31.75 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    79.375 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    22.225 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    m
    0.51 kg
    MassWeight of the product. Source: supplier data
    01

    Details

    what this bearing is, questions

    About the bearing

    D 79.375d 31.75B 22.225
    d×D×Bsize 31.75 × 79.375 × 22.225mm
    mweight 0.51kg

    Deep groove ball bearing RMS 10 2RS, design 2RS: contact seals on both sides.

    M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    02

    Reviews

    No reviews yet