+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €17.54 per piece.
NUP 2310 E · 50 × 110 × 40

Cylindrical roller · NUP 2310 E

radial — highaxial — low, on both sides
    Drawing of NUP 2310 E: ⌀50 × ⌀110 × 40 mm⌀110⌀5040NUP 2310 E
    Fig. 1: NUP 2310 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP 2310 E

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing Z&S NUP 2310 E

    €21.22per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 6 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    40 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    1.76 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 110 × 40 from other brands

    8 products
    Photo: NUP 2310 E
    You are viewingZ&S NUP 2310 E
    €21.22baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 2310NJ 2310different designCT50 × 110 × 4010 pcs€9.97−€11.25
    • Series illustration (not a photo of this item): NU2310-E-M1-C3NU2310-E-M1-C3clearance C3, E, M1FAG50 × 110 × 40available to orderon request
    • Photo: NJ 2310 E1MNJ 2310 E1ME1, MNEU50 × 110 × 40out of stockon request
    • Series illustration (not a photo of this item): NJ 2310 ECPNJ 2310 ECPreinforced design EC, PSKF50 × 110 × 40available to orderon request
    • Series illustration (not a photo of this item): NU 2310 ECPNU 2310 ECPreinforced design EC, PSKF50 × 110 × 40available to orderon request
    • Series illustration (not a photo of this item): NJ 2310 EG1C3NJ 2310 EG1C3clearance C3, G1: not decodedNTN50 × 110 × ?available to orderon request

    Under the price: the difference from the price of this bearing (€21.22).
    02

    Often bought with this

    seal 50×110, shaft snap ring Ø50, bore snap ring Ø110

    4 products
    • Seal 50×110JULU 050-110-10 TCWhy it fits: Oil seal 50×110: shaft 50 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 110 × 40mm
    mweight 1.76kg

    Cylindrical roller NUP bearing NUP 2310 E.

    M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2310 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet