+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €12.03 per piece.
NUP 211 E · 55 × 100 × 21

Cylindrical roller · NUP 211 E

radial — highaxial — low, on both sides
    Drawing of NUP 211 E: ⌀55 × ⌀100 × 21 mm⌀100⌀5521NUP 211 E
    Fig. 1: NUP 211 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP 211 E

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing Z&S NUP 211 E

    €14.56per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    OEM number
    513.00.580, 513.02.241, 55 RT 02
    Equivalents
    1 exact, 30 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    21 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.693 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 55 × 100 × 21 from other brands

    34 products
    Photo: NUP 211 E
    You are viewingZ&S NUP 211 E
    €14.56baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 211NJ 211different designCT55 × 100 × 21196 pcs€5.99−€8.57
    • Series illustration (not a photo of this item): NJ211J PQNJ211J PQJ, PQ: not decodedNTE55 × 100 × 2118 pcs€10.06−€4.50
    • Series illustration (not a photo of this item): NU 211NU 211different designCT55 × 100 × 21available to order€4.38−€10.18
    • Photo: NJ 211 EMNJ 211 EME, MZ&S55 × 100 × 21available to order€15.34+€0.78
    • Photo: NJ 211 ENNJ 211 ENE, groove for a snap ringZ&S55 × 100 × 21available to order€17.90+€3.34
    • Photo: NUP 211 NNUP 211 Ngroove for a snap ringZ&S55 × 100 × 21available to order€21.45+€6.89
    • Photo: NU 211NU 211different designGPZ55 × 100 × 21available to order€29.86+€15.30
    • Photo: NU 211 ENU 211 Edifferent designSTEYR55 × 100 × 21available to order€48.12+€33.56
    • Series illustration (not a photo of this item): NF 211NF 211different designBBC-R55 × 100 × 21out of stockon request
    • Cross-section drawing to size: Cylindrical roller, 55 × 100 × 21 mm102211 MMCT55 × 100 × 21available to orderon request

    Under the price: the difference from the price of this bearing (€14.56).
    02

    Often bought with this

    seal 55×100, shaft snap ring Ø55, bore snap ring Ø100

    4 products
    • Seal 55×100JULU 055-100-10 TCWhy it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing
      €0.98630 pcs
    • Seal 55×100SUPTEX 55x100x13Why it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing
      €4.57available to order
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 55 × 100 × 21mm
    mweight 0.693kg

    Cylindrical roller NUP bearing NUP 211 E.

    M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 211 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet