+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €28.29 per piece.
6316 ZZ · 80 × 170 × 39

Deep groove ball · 6316 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6316 ZZ: ⌀80 × ⌀170 × 39 mm6316 ZZZZ
    Fig. 1: 6316 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6316 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 6316 ZZ

    €34.23per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 28 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    39 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    130 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    86.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    4,700 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    3.6 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 39 from other brands

    32 products
    Photo: 6316 ZZ
    You are viewingZ&S 6316 ZZ
    €34.23baseline for the price comparison

    Everything the number specifies matches: series 63, 80 × 170 × 39 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

    • Photo: 6316 ZZ6316 ZZThis bearingZ&S80 × 170 × 39available to order€34.23you are here
    • Series illustration (not a photo of this item): 6316 ZZ6316 ZZFAG80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 6316 ZZ6316 ZZKG80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 6316 ZZ6316 ZZNTE80 × 170 × 39available to orderon request

    Under the price: the difference from the price of this bearing (€34.23).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 170d 80B 39
    d×D×Bsize 80 × 170 × 39mm
    Cdynamic 130kN
    C0static 86.5kN
    mweight 3.6kg

    Deep groove ball bearing 6316-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80316.

    C, C₀, m and limiting speed 4,700 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80316?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0316 corresponds to the ISO base 6316. Size 80 × 170 × 39 mm, a full equivalent of 6316-ZZ.

    Will 6316 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet