+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
63/22 2RS · 22 × 56 × 16

Deep groove ball · 63/22 2RS

radial — mediumaxial — low, on both sides
    Drawing of 63/22 2RS: ⌀22 × ⌀56 × 16 mm63/22 2RS2RS
    Fig. 1: 63/22 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 63/22 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 63/22 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 0 approximate
    d
    22 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    56 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    18.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    9.25 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    15,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.201 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 22 × 56 × 16 from other brands

    3 products
    Photo: 63/22 2RS
    You are viewingZ&S 63/22 2RS

    Not enough data for a firm conclusion: what is missing is written in the row.

    • Series illustration (not a photo of this item): 63/22 2RS63/22 2RSdimensions in the data are incompleteno brand? × ? × ?available to orderon request
    • Type diagram, no dimensions: ball63/22DDU NS7S5dimensions in the data are incompleteNSK? × ? × ?available to orderon request
    02

    Often bought with this

    shaft snap ring Ø22

    1 product
    • Shaft snap ring Ø22CT SEG 22 Z by1000Why it fits: DIN 471 snap ring for a 22 shaft: holds the inner ring on the shaft
      €16.652 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 56d 22B 16
    d×D×Bsize 22 × 56 × 16mm
    Cdynamic 18.4kN
    C0static 9.25kN
    mweight 0.201kg

    Deep groove ball bearing 63/22-2RS, design 2RS: contact seals on both sides.

    C, C₀, m and limiting speed 15,000 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet