+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €26.06 per piece.
6218 N C3 · 90 × 160 × 30

Deep groove ball · 6218 N C3

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6218 N C3: ⌀90 × ⌀160 × 30 mm⌀160⌀90306218 N C3
    Fig. 1: 6218 N C3, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6218 N C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 6218 N C3

    €31.53per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 34 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    30 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    C3
    C
    101 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    73.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    4,700 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    2.15 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 90 × 160 × 30 from other brands

    35 products
    Photo: 6218 N C3
    You are viewingZ&S 6218 N C3
    €31.53baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 62186218normal clearance, standard designCT90 × 160 × 30120 pcs€10.27−€21.26
    • Series illustration (not a photo of this item): 62186218normal clearance, standard designNTE90 × 160 × 3020 pcs€13.65−€17.88
    • Photo: 62186218normal clearance, standard designFAG90 × 160 × 30available to order€79.64+€48.11
    • Series illustration (not a photo of this item): 62186218normal clearance, standard designno brand90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 62186218normal clearance, standard designDYZV90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 6218/C46218/C4clearance C4, standard designFAG90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 62186218normal clearance, standard designKG90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 6218 NR6218 NRnormal clearance, groove and snap ringKG90 × 160 × 30available to orderon request
    • Cross-section drawing to size: Deep groove ball, 90 × 160 × 30 mm9008745177804 6218177804, 6218: not decodedNKE90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): 6218 CM6218 CMclearance CM, standard designNSK90 × 160 × 30available to orderon request

    Under the price: the difference from the price of this bearing (€31.53).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 160d 90B 30
    d×D×Bsize 90 × 160 × 30mm
    Cdynamic 101kN
    C0static 73.5kN
    mweight 2.15kg

    Deep groove ball bearing 6218 C3.

    C, C₀, m and limiting speed 4,700 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet