+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.07 per piece.
6207 2RS · 35 × 72 × 17

Deep groove ball · 6207 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6207 2RS: ⌀35 × ⌀72 × 17 mm6207 2RS2RS
    Fig. 1: 6207 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
    Bearing Z&S 6207 2RS — photo 1
    Bearing Z&S 6207 2RS — photo 2
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 6207 2RS

    €2.50per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    OEM number
    575.37.470, 634.06.180
    Equivalents
    12 exact, 63 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    17 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    27 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    15.3 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    11,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.29 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 17 from other brands

    77 products
    Photo: 6207 2RS
    You are viewingZ&S 6207 2RS
    €2.50baseline for the price comparison

    Everything the number specifies matches: series 62, 35 × 72 × 17 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

    • Photo: 6207 2RS6207 2RSThis bearingZ&S35 × 72 × 17available to order€2.50you are here
    • Photo: 6207 2RS6207 2RSCT35 × 72 × 176,825 pcs€1.42−€1.08
    • Series illustration (not a photo of this item): 6207 2RS6207 2RSNTE35 × 72 × 172,769 pcs€2.27−€0.23
    • Series illustration (not a photo of this item): 6207 2NSE6207 2NSENACHI35 × 72 × 1730 pcs€6.32+€3.82
    • Series illustration (not a photo of this item): 6207 2RS6207 2RSKoyo35 × 72 × 17200 pcs€7.33+€4.83
    • Photo: 6207 2RS6207 2RSKLT35 × 72 × 17available to order€1.23−€1.27
    • Series illustration (not a photo of this item): 6207 2RSR6207 2RSRFAG35 × 72 × 17available to order€6.27+€3.77
    • Series illustration (not a photo of this item): 6207-2RS16207-2RS1SKF35 × 72 × 17available to order€8.24+€5.74
    • Photo: 6207 2RS6207 2RSTIMKEN35 × 72 × 17available to order€11.68+€9.18
    • Series illustration (not a photo of this item): 6207 2RS6207 2RSno brand35 × 72 × 17available to orderon request

    Under the price: the difference from the price of this bearing (€2.50).
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø72, seal 35×72

    6 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.502,454 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines3 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus same geometry 2 assemblies · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    3. Belarus 1523/​1523V/​1523.3 Belarus same geometry 2 assemblies · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    4. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus same geometry 2 assemblies · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. VBP 2160 (baler) Kuhn same geometry 1 assembly · 4 pcs per machine

      ours has clearance CN; the machine takes normal (CN)

      manufacturer’s catalogue: kuhn_vbp-2160

    Number in the manufacturer’s catalogue: by GOST (180207) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 72d 35B 17
    d×D×Bsize 35 × 72 × 17mm
    Cdynamic 27kN
    C0static 15.3kN
    mweight 0.29kg

    Deep groove ball bearing 6207-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180207.

    C, C₀, m and limiting speed 11,000 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180207?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0207 corresponds to the ISO base 6207. Size 35 × 72 × 17 mm, a full equivalent of 6207-2RS.

    Will 6207 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet