+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €3.98 per piece.
6010 P6 · 50 × 80 × 16

Deep groove ball · 6010 P6

radial — mediumaxial — low, on both sides
    Drawing of 6010 P6: ⌀50 × ⌀80 × 16 mm6010 P6
    Fig. 1: 6010 P6, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6010 P6

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 6010 P6

    €4.82per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    OEM number
    532.23.620
    Equivalents
    1 exact, 32 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    22.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    Limiting speed
    9,800 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.26 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 80 × 16 from other brands

    34 products
    Photo: 6010 P6
    You are viewingZ&S 6010 P6
    €4.82baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, precision class P0CT50 × 80 × 161,754 pcs€1.98−€2.84
    • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, precision class P0NTE50 × 80 × 1659 pcs€2.58−€2.24
    • Drawing: SS 6010 2RSSS 6010 2RScontact seals on both sides, precision class P0, stainless steelCT50 × 80 × 16280 pcs€7.72+€2.90
    • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, precision class P0Koyo50 × 80 × 1623 pcs€10.88+€6.06
    • Photo: 6010 2RS6010 2RScontact seals on both sides, precision class P0Z&S50 × 80 × 16available to order€4.21−€0.61
    • Photo: 6010-2RS16010-2RS1contact seals on both sides, precision class P0SKF50 × 80 × 16available to order€12.71+€7.89
    • Photo: 6010-2RS1/C36010-2RS1/C3contact seals on both sides, clearance C3, precision class P0SKF50 × 80 × 16available to order€12.71+€7.89
    • Photo: 6010 2RS6010 2RScontact seals on both sides, precision class P0TIMKEN50 × 80 × 16available to order€16.76+€11.94
    • Photo: 6010 2RS6010 2RScontact seals on both sides, precision class P0NEU50 × 80 × 16available to order€20.32+€15.50
    • Series illustration (not a photo of this item): 6010 2RS6010 2RScontact seals on both sides, precision class P0no brand50 × 80 × 16available to orderon request

    Under the price: the difference from the price of this bearing (€4.82).
    02

    Often bought with this

    seal 50×80, shaft snap ring Ø50, bore snap ring Ø80

    6 products
    • Seal 50×80JULU 050-80-10 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing
      €0.541,000 pcs
    • Seal 50×80JULU 050-80-8 TCWhy it fits: Oil seal 50×80: shaft 50 and housing bore 80, the same as the bearing
      €0.54700 pcs
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    3 machines2 makesby parts catalogues

    1. Belarus-152 Belarus same geometry 3 assemblies · 5 pcs per machine

      ours is P6; the machine takes P0

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 1 assembly · 2 pcs per machine

      ours is P6; the machine takes P0

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours is P6; the machine takes P0

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    Number in the manufacturer’s catalogue: by GOST (110) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 80d 50B 16
    d×D×Bsize 50 × 80 × 16mm
    Cdynamic 22.9kN
    mweight 0.26kg

    Deep groove ball bearing 6010. Under GOST the same bearing is designated 110.

    C, m and limiting speed 9,800 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 110?

    It is the same bearing under GOST 3189-89: 110 corresponds to the ISO base 6010. Size 50 × 80 × 16 mm, a full equivalent of 6010.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet