+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.83 per piece.
6005 2RS · 25 × 47 × 12

Deep groove ball · 6005 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6005 2RS: ⌀25 × ⌀47 × 12 mm6005 2RS2RS
    Fig. 1: 6005 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
    Bearing Z&S 6005 2RS — photo 1
    Bearing Z&S 6005 2RS — photo 2
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 6005 2RS

    €1.00per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    OEM number
    577.03.450, 644.81.140, GASPARDO 51104406
    Equivalents
    14 exact, 47 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    12 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    11.9 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    6.55 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    18,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.08 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 47 × 12 from other brands

    65 products
    Photo: 6005 2RS
    You are viewingZ&S 6005 2RS
    €1baseline for the price comparison

    Everything the number specifies matches: series 60, 25 × 47 × 12 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

    • Photo: 6005 2RS6005 2RSThis bearingZ&S25 × 47 × 12available to order€1you are here
    • Series illustration (not a photo of this item): 6005 2RS6005 2RSCT25 × 47 × 1211,894 pcs€0.58−€0.42
    • Series illustration (not a photo of this item): 6005 2NSE6005 2NSENACHI25 × 47 × 1290 pcs€3.19+€2.19
    • Series illustration (not a photo of this item): 6005 2HRS6005 2HRSFAG25 × 47 × 12300 pcs€3.80+€2.80
    • Photo: 6005 2RSH6005 2RSHSKF25 × 47 × 121,520 pcs€4.17+€3.17
    • Series illustration (not a photo of this item): 6005 2RS6005 2RSNTE25 × 47 × 12available to order€0.76−€0.24
    • Photo: 6005 2RS6005 2RSWBW25 × 47 × 12available to order€1same price
    • Photo: 6005 2RS6005 2RSTIMKEN25 × 47 × 12available to order€6.06+€5.06
    • Series illustration (not a photo of this item): 6005 2RS6005 2RSno brand25 × 47 × 12available to orderon request
    • Series illustration (not a photo of this item): 6005 2RS6005 2RSFJK25 × 47 × 12out of stockon request

    Under the price: the difference from the price of this bearing (€1).
    02

    Often bought with this

    shaft snap ring Ø25, bore snap ring Ø47, seal 25×47

    5 products
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 25×47JULU 025-47-7 TCWhy it fits: Oil seal 25×47: shaft 25 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.292,309 pcs
    • Seal 25×47JULU 025-47-4 TCWhy it fits: Oil seal 25×47: shaft 25 and housing bore 47, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmed20 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    4 machines3 makesby parts catalogues

    1. Gaspardo Nina 250/​300/​400 Maschio Gaspardo exactly this number 2 assemblies

      manufacturer’s catalogue: maschio_nina-2007

    2. VBP 2160 (baler) Kuhn exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: kuhn_vbp-2160

    3. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 2 assemblies · 3 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Gaspardo Nina 250/​300/​400 (mechanical seed drill) Maschio Gaspardo same geometry 1 assembly

      ours: seals on both sides (2RS); in the machine: shields on both sides (ZZ)

      manufacturer’s catalogue: maschio_nina-2015

    Number in the manufacturer’s catalogue: by GOST (180105) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 47d 25B 12
    d×D×Bsize 25 × 47 × 12mm
    Cdynamic 11.9kN
    C0static 6.55kN
    mweight 0.08kg

    Deep groove ball bearing 6005-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180105.

    C, C₀, m and limiting speed 18,000 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180105?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0105 corresponds to the ISO base 6005. Size 25 × 47 × 12 mm, a full equivalent of 6005-2RS.

    Will 6005 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet