+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
60/28 2RS · 28 × 52 × 12

Deep groove ball · 60/28 2RS

radial — mediumaxial — low, on both sides
    Drawing of 60/28 2RS: ⌀28 × ⌀52 × 12 mm60/28 2RS2RS
    Fig. 1: 60/28 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 60/28 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 60/28 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 0 approximate
    d
    28 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    12 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    12.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    7.4 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    16,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.097 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 28 × 52 × 12 from other brands

    2 products
    Photo: 60/28 2RS
    You are viewingZ&S 60/28 2RS

    Not enough data for a firm conclusion: what is missing is written in the row.

    • Type diagram, no dimensions: ball60/28DD NS7S5dimensions in the data are incompleteNSK? × ? × ?available to orderon request
    02

    Often bought with this

    shaft snap ring Ø28, bore snap ring Ø52, seal 28×52

    5 products
    • Shaft snap ring Ø28CT SEG 28 Z by 1000Why it fits: DIN 471 snap ring for a 28 shaft: holds the inner ring on the shaft
      €32.92available to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    • Seal 28×52JULU 028-52-10 TCWhy it fits: Oil seal 28×52: shaft 28 and housing bore 52, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.3690 pcs
    • Seal 28×52JULU 028-52-7 TCWhy it fits: Oil seal 28×52: shaft 28 and housing bore 52, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.35available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 52d 28B 12
    d×D×Bsize 28 × 52 × 12mm
    Cdynamic 12.2kN
    C0static 7.4kN
    mweight 0.097kg

    Deep groove ball bearing 60/28-2RS, design 2RS: contact seals on both sides.

    C, C₀, m and limiting speed 16,000 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet