+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €11.33 per piece.
4209 2RS · 45 × 85 × 23

Deep groove ball · 4209 2RS

radial — mediumaxial — low, on both sides
    Drawing of 4209 2RS: ⌀45 × ⌀85 × 23 mm4209 2RS2RS
    Fig. 1: 4209 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 4209 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 4209 2RS

    €13.71per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 5 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    85 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    23 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    m
    0.549 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 85 × 23 from other brands

    7 products
    Photo: 4209 2RS
    You are viewingZ&S 4209 2RS
    €13.71baseline for the price comparison

    Everything the number specifies matches: series 42, 45 × 85 × 23 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

    • Photo: 4209 2RS4209 2RSThis bearingZ&S45 × 85 × 23available to order€13.71you are here
    • Cross-section drawing to size: Deep groove ball, 45 × 85 × 23 mm4209 2RSno brand45 × 85 × 23available to orderon request

    Under the price: the difference from the price of this bearing (€13.71).
    02

    Often bought with this

    shaft snap ring Ø45, bore snap ring Ø85, seal 45×85

    4 products
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø85CT SEG 85 W by 100Why it fits: DIN 472 snap ring for a 85 bore: holds the outer ring in the housing
      €22.57out of stock
    • Seal 45×85JULU 045-85-10 TCWhy it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.62690 pcs
    • Seal 45×85SOG Oil seal 45x85x10Why it fits: Oil seal 45×85: shaft 45 and housing bore 85, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 85d 45B 23
    d×D×Bsize 45 × 85 × 23mm
    mweight 0.549kg

    Deep groove ball bearing 4209-2RS, design 2RS: contact seals on both sides.

    M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet